diy fabric bunting

instructions below

what you'll need: 

twine
fabric squares
hot glue gun

step one:  fold your fabric squares in half diagonally and crease the center line.

step two:  trace hot glue in one of the triangles on the inside of the fabric.  i have marked in pencil how i did it below.  you want to make sure you have room to insert twine between your hot glue and that top-crease. 

step three:  lightly press the fabric closed; be careful along the top-crease line not to smudge too much.  but don't press too lightly or else what happened below will happen-- the hot glue will dry before it attaches to the other side of the fabric.

step four:  repeat for all fabric squares.

step five:  thread the twine through the crease/hot glue crevice at the top of each fabric square.

when you're finished it will look like this:

step six:  measure between each triangle and hot glue the corners of each, sealing the twine to the fabric in place.  i measured mine out 1 1/2 inches between each triangle.  it doesn't take too long to dry so it goes by quickly.  just be careful of your fingers in those corners!  it's not called hot glue for nothing!

and you're done!